207-075-0002 | Genuine Cummins® DOC Diesel Oxygen Catalyst ISX

1. Function

The DOC’s primary job is to break down pollutants through a chemical process called oxidation. It contains a honeycomb structure coated with precious metals (like platinum). When exhaust passes through, it converts Carbon Monoxide (CO) and Hydrocarbons (HC) into Carbon Dioxide ($CO_2$) and water vapor.

2. Supporting the DPF

In an ISX engine, the DOC is critical for "regeneration." It oxidizes fuel to create the high temperatures necessary for the Diesel Particulate Filter (DPF) to burn off trapped soot. If the DOC fails, the DPF will likely clog shortly after.

1. Frequent or Failed DPF Regens

The DOC is responsible for creating the heat needed to clean the DPF. If the DOC is "poisoned" (coated in oil or coolant), it cannot reach the necessary temperatures. You will notice the truck requesting a parked regen more often, or the regen failing to complete.

2. "Face Plugging" or Soot Accumulation

If you look inside the DOC and see a layer of black soot or ash covering the inlet (face), the catalyst is blocked. This increases backpressure, which can damage the turbocharger and reduce engine performance.

3. Low Temperature Readings

Using a diagnostic tool, you might see that the temperature exiting the DOC is not significantly higher than the temperature entering it during a regen. This "temperature rise" is required for the system to work; if it's missing, the DOC is chemically dead.

4. Engine Fault Codes

Common Cummins ISX fault codes include:

• FC1691: Aftertreatment 1 Diesel Oxidation Catalyst Efficiency - Below Normal.

• FC1695/1696: Related to abnormal temperature sensor readings across the DOC.